BTPLB - LYSE S III DIFF LYTIC REAGENT

  • MSDS: BTPLB
  • Manufacturer: COULTER DIAGNOSTIC INC
  • Product Name: LYSE S III DIFF LYTIC REAGENT
  • National Stock Number: 6550-01-190-3557
Product Identification

Product ID:LYSE S III DIFF LYTIC REAGENT
MSDS Date:09/11/1991
FSC:6550
NIIN:01-190-3557
MSDS Number: BTPLB

Responsible Party
COULTER DIAGNOSTIC INC
7381 EMPIRE DR
FLORENCE, KY 41042
US

Cage: COLDI

Contractor
CURTIN MATHESON SCIENTIFIC INC
KENNESAW, GA 30144 US

Telephone: 404-590-9016

Cage: 8C742

Ingredients

POTASSIUM CYANIDE

CAS: 151-50-8

RTECS: TS8750000

Fraction By Weight: 0.03%

OSHA PEL 5 MG (CN)/CUM

ACGIH TLV: 5 MG (CN)/CUM (SKIN)

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS


QUATERNARY AMMONIUM SALT *93-4*

CAS: 102561-46-6

Fraction By Weight: 2.6%

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:WEAKNESS, DIZZINESS, HEADACHE, NAUSEA,
VOMITING, IRRITATION.

First Aid

First Aid:SKIN: WASH AFFECTED AREA W/SOAP & WATER. EYES: FLUSH W/PLENTY
OF WATER. INGESTION: GIVE WARM SALT WATER UNTIL VOMIT IS CLEAR. IF
UNCONSCIOUS, GIVE INHALATIONS OF AMYL NITRATE FOR 15-30 SECONDS,
EVERY 15 MINUTES FOR 1 HOUR. GIVE CPR IF NECESSARY. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Fire Fighting

Extinguishing Media:ANY FOR APPROPRIATE SURROUNDINGS.

Accidental Release

Spill Release Procedures:VENTILATE AREA. WEAR SPLASH GOGGLES/RUBBER
GLOVES. NEUTRALIZE. ABSORB USING TOWELS/ABSORBANT MATERIAL FROM
COMMERCIAL CHEMICAL KIT. CONTAIN ABSORBED WASTE IN BIO-HAZARD BAGS.
AREA MAY BE SLIPPERY. FLU SH THOROUGHLY W/WATER TO APPROVED OUTSIDE
DRAIN.
Neutralizing Agent:STRONG ALKALINE SOLUTIONS OF CALCIUM/SODIUM
HYPOCHLORITE

Handling

Handling and Storage Precautions:STORE AT ROOM TEMPERATURE. KEEP
CONTAINER CLOSED. AVOID CONTACT W/SKIN & EYES. KEEP AWAY FROM FOOD
PRODUCTS. AVOID BREATHING GAS.

Exposure Controls

Ventilation:ADEQUATE
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES/SPLASH GOGGLES
Other Protective Equipment:LAB COAT
Work Hygienic Practices:WASH HANDS THOROUGHLY W/SOAP & WATER AFTER
HANDLING. REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:212F
Spec Gravity:1
Solubility in Water:COMPLETE
Appearance and Odor:YELLOW LIQUID

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS, ACID SALTS, OXIDIZERS
Hazardous Decomposition Products:TOXIC HYDROGEN CYANIDE GAS

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE &
LOCAL REGULATIONS. EPA WASTE # P030

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.